This installation guide applies to Fscreen magnetic screen series. Please reference it when installing magnets.
Before installation, please make sure the installation surface is clean.
1. Tear off the protective film on the back of the magnet by 10cm and flatten it from the middle to both sides
2.Keep the magnet in a straightened state, align the upper edge with the mounting area shown in the bitmap, and secure it firmly.
3.Tear off the rest of the protective film from the middle down with one hand at a constant speed, and compress the magnet from the middle down with the other hand.
4.With both hands, press the magnets down from top to bottom and from center to sides.
5.Using scraper to compact and flatten the whole magnetic stick repeatedly
6.If found there is the bubbles on magnet sticker, please using the knife to cut through it.